[email protected]
0124-40911 11/09,9311909758
  1. Home
  2. Products
  3. After Cooler – Water Cooled – AC & MS Series
After Cooler Water Cooled AC MS Series

After Cooler – Water Cooled – AC & MS Series

Range 50 m3/hr. To 6000 m3/hr (Higher capacities available on request)

Our Airgineers Can Help You Select The Right Product!

Enquire Now
Compressed Air Solutions For Automobile Industry
Print
Share
Technical Specification
Product Manual

Air Cooled After Cooler cools incoming compressed air using an axial flow electric fan, which draws air from the atmosphere and passes it through a fin-and-tube type heat exchanger.

Special Features

  • Wide range of 15 standard models with capacities from 50 m3/hr. to 6000 m3/hr.
  • Compact design
  • Cooler in accordance with international design codes like TEMA-C, ASME, IS-2825.
  • Duly tested – pneumatically & hydrostatically

Optional Features

  • Auto drain valve

Std. Working Parameters

  • Water Inlet Temperature: 32°C (Max.)
  • Water Outlet Temperature: 38°C
  • Water Inlet Pressure : 3 – 4 kg/cm2(g)
  • Air Inlet Pressure: 7 – 12 kg/cm2(g)
  • Air Inlet Temperature: 60°C
  • Air Outlet Temperature: 40°C
MODEL NO. CAPACITY
IN M3/HR		 DIMENSIONS
(IN MM)		 CONNECTION
(IN MM)		 WATER QTY.
IN LPM
AIR WATER
ØD H~ N1 & N2 N3 & N4
AC-50 50 65 1550 20 15 5
AC-100 100 80 1560 25 20 10
AC-250 250 125 1580 40 15 25
AC-500 500 150 1600 50 20 50
AC-750 750 150 1600 50 32 75
AC-1000 1000 150 1800 80 40 100
AC-1250 1250 150 2265 80 40 125
AC-1500 1500 200 1700 100 50 150
AC-1750 1750 200 2000 100 50 175
AC-2000 2000 200 2300 100 50 200
AC-2500 2500 250 1875 100 65 250
AC-3000 3000 250 2340 100 65 300
AC-3500 3500 250 2490 150 80 350
AC-4500 4500 300 2350 150 80 450
AC-6000 6000 300 2350 150 100 600

DelCare

Our wide network of trained Airgineers® is renowned for providing prompt and reliable services. They ensure regular maintenance of your machine and offer technical support for any required accessory changes or machine faults. For any maintenance or technical support queries, write to us at:

[email protected]

Frequently Asked Questions

A water-cooled aftercooler reduces the temperature of compressed air after it leaves the compressor. Cooling lowers the air temperature and helps remove moisture that can condense from the compressed air stream.

A water-cooled aftercooler for compressed air uses a compact heat-exchanger construction with compact design. Units can be built to applicable international design codes including TEMA-C, ASME and IS-2825, and pneumatically and hydrostatically tested before dispatch.

The standard parameters include a maximum water inlet temperature range of 32-38 °C, water outlet temperature range of 38-44 °C, water inlet pressure of 3–4 kg/cm²(g), and air inlet pressure of 7–16 kg/cm²(g). The standard air inlet temperature is 60-65 °C, with the air outlet temperature reduced to approximately 40°C or slightly lower.

Delair offers 15 standard models covering 50 m³/hr to 6000 m³/hr, with higher capacities available on request. An auto drain valve can be supplied as an option to remove condensate collected during cooling.

Delair’s AC Series uses about 1 LPM of water for every 10 m³/hr of air, from 5 LPM (AC-50) to 600 LPM (AC-6000).

A water-cooled unit needs a cooling water supply, while an air-cooled unit uses a fan and ambient air.

whatsapp_avatar

Delair India Support
Online

For assistance, please enter your email and phone number below.
×
To top